IDENTIFIKASI PENYELESAIAN LINE STOP A&B CYLINDER HEAD PADA ROUGH RAW MATERIAL MENGGUNAKAN POKA YOKE

Indrawan Indrawan, Muhammad Rusydi, Rizki Dwi Afrianto

Abstract


In solving problems in this study background using the Poka Yoke method. PT. XYZ is the object of research this time and focuses on solving the Line Stop problem on Line A & B Cylinder Head on Rough Raw Materials. The purpose of the research for possible failure that occurs or has happened. After the failure is known, the next alternative problem solving is to prevent errors that will occur and/or activities/actions using the Poka Yoke method. The discovery in this study is known that the problem process when the spare part runs from the stopper at the shutter input rough raw material line A & B. So that it results in a spare part and exceeding work in procces (WIP) which can cause the IMSP-0011 engine to become a fault and line stop average 10 minutes per day. The results of this study using the Poka Yoke method through specific, measurable, achievable, reasonable and timephase (SMART) approaches which in essence are by adding Poka Yoke barrier to the stopper and changing ordinary nuts into nut lock. So the conclusion results of the implementation show the stopper functioning maximally, then the spare part according to the WIP.

Keywords


Poka yoke, Line stop, Rough raw material, SMART

References


Aishwarya, 2015. Poka-Yoke: Technique to Prevent Defects. International Journal of Engineering Science & Research Technology, IV(2), pp. 12-19.

Andani, S. R., 2019. Penerapan Metode SMART dalam Pengambilan Keputusan Penerima Beasiswa Yayasan AMIK Tunas Bangsa. Jurnal Sistem dan Teknologi Informasi (JUSTIN), VII(3), pp. 166-171.

Budiani, B., Permana, F., Fadlisyah, H. & Fauzi, M., 2020. Standarisasi Pelabelan Menggunakan Metode Poka Yoke untuk Menghindari Larutan Kadaluarsa. Jurnal Profisiensi, VIII(2), pp. 105-115.

Dave, Y., 2015. Implementation of Poka Yoke Technique in a Gear Industry. Study International Journal of Latest Research Science adn Technology, IV(3), pp. 32-39.

Diedrich, F. & Jansen, K., 2017. Faster and Simpler Approximation Algorithms for Mixed Packing and Convering Problems. Theoretical Computer Science, III(1), pp. 181-204.

Djunaidi, M. & Pahlevi, N. O., 2021. Application of the Poka Yoke Method in the Mix Packing Part Process to Control the Ammount of Flow Out. OPSI: Jurnal Optimasi Sistem Industri, XIV(1), pp. 50-58.

Hartanto, C., 2013. Perancangan Metode Poka Yoke pada Proses Layanan Toko Sejahtera Kendari. Calyptra: Jurnal Ilmiah Mahasiswa Universitas Surabaya, II(1), pp. 1-17.

Hudori, M., 2017. Poka Yoke untuk Pembuatan Palet Package Information di Bagian Shipping. Industrial Engineering Journal, VI(1), pp. 1-17.

Indrawan, I., Rusydi, M. & Jaya, A. S. D., 2020. Standarisasi Pencegahan Body Menabrak Sliding Door Menggunakan Metode Poka Yoke. Jurnal Sains dan Teknologi: Keilmuan dan Aplikasi Teknologi Industri, XXI(2), pp. 213-220.

Kesaeri, H. A. & Prasetio, D. E. A., 2019. Minimasi Waste Melalui Perancangan Poka-Yoke pada Area Standby Small Part di PT. XYZ. Jurnal Inovisi, XV(1), pp. 43-47.

Kho, B., 2016. Pengertian Pokayoke, Cause and Effect Diagram (Fishbone Diagram) Cara Membuatnya. Dipetik Nopember, XXX(1), pp. 1-12.

Luthfianto, S. & Nurwildani, F., 2017. Perancangan Alat Penggiling Ikan dengan Pendekatan Ergonomi untuk Meningkatkan Produktivitas. Simetris: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer, VIII(1), pp. 1-8.

Majori, A. R., 2020. Upaya Meminimasi Waste pada Lini Produksi Body Saxophone As23 dengan Menggunakan Pendekatan Lean Production Studi Kasus: PT. XYZ. Jurnal Universitas Muhammadiyah Malang, I(1), pp. 1-9.

Marpaung, N. & Handayani, M., 2020. Penentuan Pangan Layak Konsumsi di Masa Pandemi Covid-19 dengan Sistem Pendukung Keputusan Menggunakan Metode Mfep. Pekanbaru, Prosiding-Seminar Nasional Teknologi Informasi & Ilmu Komputer.

Nababan, N. Y., Faizal, A. & Jatnika, M. E., 2020. Usulan Perbaikan Defect pada Sablon Plastik Menggunakan Metode Poka Yoke di CV. Bayor Print 69. Jurnal Ilmiah Teknologi Informasi Terapan, VI(2), pp. 167-175.

Pangaribuan, G. R., Windarto, A. P., Mustika, W. P. & Wanto, A., 2019. Pemilihan Jenis Sapi bagi Peternak Sapi Potong dengan Metode SMART. Algoritma: Jurnal Ilmu Komputer dan Informatika, III(1), pp. 30-41.

Putra, A. & Sudiro, S., 2018. Penerapan Pokayoke untuk Mencegah Misbinning pada Mesin Symtek-300 Handler. Teknobiz: Jurnal Ilmiah Program Studi Magister Teknik Mesin, VIII(1), pp. 38-48.

Putri, D. R. & Handayani, W., 2019. Zero Deffect pada Produksi Kantong Kraft Melalui Metode Poka Yoke di PT. Industri Kemasan Semen Gresik. Journal MEBIS, Journal Manajemen dan Bisnis, IV(1), pp. 44-58.

Rahayu, P. & Bernik, M., 2020. Peningkatan Pengendalian Kualitas Produk Roti dengan Metode Six Sigma Menggunakan New & Old 7 Tools. Jurnal Bisnis & Kewirausahaan, I(1), pp. 128-136.

Ratri, R. R., 2016. Sistem Pendukung Keputusan Pemilihan Kain Tapis Menggunakan Metode Simple Additive Weighting (SAW). STMIK Pringsewu Lampung, IV(1), pp. 249-255.

Sibyan, H., 2020. Implementasi Metode SMART pada Sistem Pendukung Keputusan Penerima Beasiswa Sekolah. Jurnal Penelitian dan Pengabdian Kepada Masyarakat UNSIQ, VII(1), pp. 78-83.

Singh, P. & Archana, N., 2017. Optimization of Supply Chain System by Implementing Milk Run Logistics Method - An Implementation Paper. International Journal of Innovative Research in Science, Engineering and Technology, VI(4), pp. 5380-5490.

Thareja, P., 2016. Poka Yoke: Poking Into Mistakes for Total Quality!. Omni Science: A Multi-disciplinary Journal, VI(2), pp. 11-20.

Ulum, R. & Munir, M., 2019. Implementasi Six Sigma dengan Pendekatan Poka Yoke guna Reduksi bagian Case Packer pada PT. X. Journal Knowledge Industrial Engineering (KJIE), VI(1), pp. 11-23.

Zebua, S. & Simanjorang, R. M., 2021. Sistem Pendukung Keputusan Pemilihan Kain Terbaik di Toko Crown Taxtile & Tailor Weighting (SAW). Jurnal Teknologi dan Informasi, IV(5), pp. 397-404.




DOI: http://dx.doi.org/10.36275/stsp.v22i2.495

Article Metrics

Abstract view : 76 times
PDF (Bahasa Indonesia) - 22 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Indrawan Indrawan, Muhammad Rusydi, Rizki Dwi Afrianto

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Penerbit : Sekolah Tinggi Teknologi Industri Padang


Alamat:
Jalan Hamka no.121 Tabing Padang. Indonesia
email: info@sttind.ac.id
HP:082386758367