PEMANFAATAN SAMPAH PLASTIK MENJADI BRIKET SEBAGAI BAHAN BAKAR ALTERNATIF DALAM KILN DI PABRIK PT SEMEN PADANG
Abstract
Coal is a natural resource that can not be updated and will be depleted when used continuously. PT Semen Padang is a cement industries that use coal as fuel in large quantities which can increase production costs. It should be considered for alternative materials that can be used as fuel. The example is plastic waste that has tremendous potential as an alternative fuel. For that conducted research on the make of plastic waste into briquettes with technology Plastic Waste as alternative fuel to substitute for coal in the kiln PT Semen Padang from two types of plastic waste, is garbage plastic bags (PP) and a glass of mineral water plastic waste (PET). This study aims to determine the quality of briquettes, to obtain a picture of whether plastic pellets briquettes can be used as a substitute for coal and a comparison of the use of coal briquettes plastic pellets in the kiln PT Semen Padang. From the test, it is known that the briquettes garbage plastic bags have a calorific value of 10.112 cal/gram, ash content of 3,90%, 0,36% moisture and volatile content of 94,74%. And briquettes from waste plastic glasses of mineral water has a calorific value of 10.844 cal/gram, ash content of 0,27%, 0,42% moisture and volatile content of 99,27%. From these results it can be seen that the briquettes from waste glasses of mineral water has a better quality. And when compared with the specifications of coal used in the kiln Indarung IV calorific value 5200 - 5600 cal/gram, maximum ash content of 20% and a maximum water content of 10%, then the two types of briquette plastic pellets can be used as a fuel substitute for coal. Based on the comparison of calorific value and the use of coal in the kiln Indarung IV which is an average of 35 tons / hour, then the ratio of the amount of usage of coal with briquettes from waste plastic bags is 1: 0.53, and with briquettes from waste plastic glasses of mineral water is 1: 0.50.
Keywords: plastic waste, coal, briquettes, quality, fuel
Full Text:
PDF (Bahasa Indonesia)References
Afdhal, Borris dkk. 2013. Studi Timbulan, Komposisi dan Potensi Daur Ulang Sampah Kawasan PT Semen Padang. Jurnal Teknik Lingkungan UNAND 10 (2) : 111-118, (http://lingkungan.ft.unand.ac.id/images/fileTL/Dampak10 -2/4-YMD.pdf, diakses 14 Agustus 2015)
Asip, Faisol dkk. 2014. Pembuatan Briket dari Campuran Limbah Plastik LDPE, Tempurung Kelapa dan Cangkang Sawit. Jurnal Teknik Kimia, No. 02 Vol. 20, (http://jtk.unsri.ac.id/index.php/jtk/article/viewFile/169/168, diakses 02 Juli 2015)
Badan Standarisasi Nasional. 2000. SNI 01-6235-2000 Tentang Briket Arang. Jakarta : Badan Standarisasi Nasional.
Badan Standarisasi Nasional. 1991. SNI 19-2454-1991 Tentang Tata Cara Teknik Pengolahan Sampah Perkotaan. Jakarta : Badan Standarisasi Nasional.
British Standart. 1997. BS 1016 : Methods for Analysis and Tensting of Coal and Coke. Inggris : British Standart.
Chandrianto. 2012. Pengelolaan Persampahan. Padang : Sekolah Tinggi Teknologi Industri Padang.
Dharini, Mega dan Yulinah Trihadiningrum. 2010. Studi Terhadap Timbulan Sampah Plastik Multilayer serta Upaya Reduksi yang Dapat Diterapkan di Kecamatan Jambangan Surabaya. Jurnal Penelitian, (http://digilib.its.ac.id/public/ITS-Undergraduate-15498-3306100067-Paper, diakses 02 Juli 2015)
Ervil, Riko dkk. 2013. Panduan Penulisan dan Ujian Skripsi. Padang : Sekolah Tinggi Teknologi Industri Padang.
Hadi, Arif Ismul. 2012. Analisis Kualitas Batu Bara Berdasarkan Nilai HGI dengan Standar ASTM. Jurnal Ilmu Fisika Indonesia, Vol. 01 No. 01, (https://jsimetri.files.wordpress.com/2012/06/v1-no1-09-arif-37-41.pdf, diakses 25 September 2015)
Hambali, Erliza dkk. 2007. Teknologi Biobriket. Bogor : PT.Agromedia pustaka.
Mardiana, Gatot, dan Rahardi Mahadika. 2010. Pemanfaatan Limbah Biomass Sebagai Bahan Bakar Alternatif dalam Kegiatan Co-Processing di PT Semen Gresik. Seminar Rekayasa Kimia Dan Proses, ISSN : 1411-4216, (http://eprints.undip.ac.id/19600/1/D-14.pdf, diakses 02 Juli 2015)
Nizwardi, Azkha. 2006. Analisis Timbulan, Komposisi dan Karakteristik Sampah Di Kota Padang. Jurnal Kesehatan Masyarakat, I (1), (http://jurnal.fkm.unand.ac.id/index.php/jkma/article/view/5, diakses 14 Agustus 2015)
Nursanto, Edy. 2011. Keterdapatan dan Tipe Mineral Pada Batu Bara Serta Metode Analisisnya. Jurnal Teknologi Technoscientia, Vol. 4 No. 01, (http://www.undana.ac.id/jsmallfib_top/jurnal, diakses 24 September 2015)
Pamungkas, Yulius. 2010. Teknologi Co-Processing : Solusi Alternatif Mereduksi Bahan Bakar Fosil dan Gas CO2 di Industri Semen Indonesia. Jurnal Rekayasa Proses, Vol. 4 No. 02, (http://jurnal.ugm.ac.id/ jrekpros/article/download/.../1695 , diakses 02 Juli 2015)
PT Semen Padang. 2010. Spesifikasi Standar Internal PT Semen Padang. Padang : PT Semen Padang
Rizkivia, Deqi. 2010. Eko-Briket dari Komposisi Sampah Plastik High Density Polyethylene (HDPE) dan Arang Sampah Organik Kota. Jurnal Penelitian, (http://digilib.its.ac.id/public/ITS-Undergraduate-10085-Paper, diakses 14 Agustus 2015)
Suharto. 2010. Rancangan Produk Bahan Plastik Daur Ulang Sebagai Upaya Peningkatan Industri Kreatif. Jurnal Rekayasa, (http://polines.ac.id/ rekayasa/upload/jurnal/jurnal rekayasa 1335760925.pdf diakses 02 Juli 2015)
Sumadi. 1998. Metodologi Penelitian. Jakarta : Universitas Gadjah Mada.
Surono, Untoro. 2013. Berbagai Metode Konversi Sampah Plastik Menjadi Bahan Bakar Minyak. Jurnal Teknik Vol. 03 No. 01, (http://jurnalteknik. janabadra.ac.id/wp-content/uploads/2014/03/05-Artikel-Untoro-Revisi.pdf, diakses 02 Juli 2015)
Surya, Supeno. 2005. Dioxin Free. Medan : Pustaka Nasional.
Wahyu, Dian, dan Ruzita Sumiati. 2009. Analisi Energi Pada Sistem Rotary Kiln Unit Indarung IV PT Semen Padang. Jurnal Teknik Mesin Vol. 6 No.02, (http://download.portalgaruda.org/article.php.article=57943&val=43, diakses 02 Juli 2015)
DOI: http://dx.doi.org/10.36275/stsp.v16i1.56
Article Metrics
Abstract view : 4658 timesPDF (Bahasa Indonesia) - 1958 times
Refbacks
- There are currently no refbacks.
Copyright (c) 2016 Hendri Sawir
This work is licensed under a Creative Commons Attribution 4.0 International License.