USULAN BIAYA PREVENTIVE MAINTENANCE DENGAN MENGGUNAKAN METODE MODULARITY DESIGN PADA MESIN RIPPLE MILL DI PT. INCASI RAYA POM

Henny Yulius, Fredy Tri Susanto

Abstract


PT. Incasi Raya POM, is a company engaged in the field of industry, which is engaged in palm oil processing. To maintain quality and productivity, important factors that must be considered are issues of maintenance (maintenance) of machines and production facilities and maintenance costs. Related to the party who gets the maintenance assignment, the policy needed for the best treatment system for the company. This research was conducted to discuss the problem of minimizing the cost of maintenance of existing press machines at PT. POM Raya Incasi. The method used to compare the maintenance costs of ripple mill machines is the modularity design that was distributed in the period 2019. With a total damage of each component as many as 39 damage. The total cost of repairing the machine at the cost of failure (CF) results in a total of Rp. 34,880,198, the cost of Preventive (CP) yields a total of Rp. 84,757,652, and at the cost of preventive modularity (CPM) get results with a total of Rp. 20,376,324 per year. Of the total costs, PT. Incasi Raya POM can find out how much the total maintenance cost for this ripple machine in the future, which allows the company to save budget in the process of ripple machine maintenance in the palm oil production process.

Keywords


Modularity Design, Cost Of Preventive, Cos Of Failure

References


Ating Sudradjat. Pedoman Praktis Manajemen Perawatan Mesin Industri. Bandung, PT. Refika Aditama. 2011.

Blanchar, dan Prabowo, H.G. . Sistem Perawatan Mesin Press. Teknik Industri, Universitas Marcu Buana, Jakarta. Jurnal Pasti Industrial Emgineering Indiana John, 3(1), 33-43. 2010.

Daryanto. Keselamatan Kerja Peralatan Bengkel dan Perawatan Mesin. Bandung, CV Alfabeta.2010.

Ekawati, C. dan Mustofa, F. H. Jadwal Perawatan Preventive Pada Mesin Dyeing Menggunakan Metode Age Replacement Di Pt . Nobel Industries *. Jurnal Online Institut Teknologi Nasional, 4(2), 137–148. 2016.

Fajar Kurniawan. Teknik Dan Aplikasi Manajemen Perawatan Industri, Yogyakarta, Graha Ilmu. 2013.

Fakultas, D. et al. ‘Preventive Maintenance System Dengan Modularity Design Sebagai Solusi Penurunan Biaya Maintainance (Studi Kasus di Perusahaan Tepung Ikan)’, Jurnal Teknik Industri, 7(1), pp. 61–75. doi: 10.9744/jti.7.1.pp.61-75. 2005.

Hery Suliantoro, dan Mustofa Muthi Said Susilo. Analisis Kebijakan Corrective dan Preventive Maintenance Pada Mesin Rapier Di PT. Tiga Manunggal Synthetic Indutries. Jurnal Ilmiah Teknik Industri, 1404. 2013.

Hariyanto, H., Rahayuningsih, S. and Santoso, H. ‘Analisa Preventive Maintenance System Dengan Modularity Design Pada PT. Surya Pamenang’, JATI UNIK : Jurnal Ilmiah Teknik dan Manajemen Industri, 1(1), p. 24. doi: 10.30737/jatiunik.v1i1.66. 2017.

Jaka Purnama, Yosua Anggara Putra, M. K ‘Metode Age Replacement Digunakan Untuk Menentukan Interval Waktu Perawatan Mesin Pada Armada Bus’, Seminar Nasional Sains dan Teknologi Terapan III 2015 Institut Teknologi Adhi Tama Surabaya ISBN, pp. 115–126. 2015.

Witonohadi, A., Amran, T. G. and Herawati, N. ‘Usulan Perawatan Mesin Secara Preventif Dengan Pendekatan Modularisasi Desain Pada Pt. Bai’, Jurnal Teknik Industri, 3(1), pp. 1–9. doi: 10.25105/jti.v3i1.1581. 2013.




DOI: http://dx.doi.org/10.36275/stsp.v20i2.304

Article Metrics

Abstract view : 39 times
PDF (Bahasa Indonesia) - 20 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Jurnal Sains dan Teknologi: Jurnal Keilmuan dan Aplikasi Teknologi Industri

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Penerbit : Sekolah Tinggi Teknologi Industri Padang

Alamat:
Jalan Hamka no.121 Tabing Padang. Indonesia
email: info@sttind.ac.id
HP:082386758367